Dealer of Tenaris Pipes, Distributor of Remi Steel Pipes

Steel pipe tubes are round or hollow in structure. These tubes are formed after casting raw steel into working form. This is done by hot and cold rolling procedures. These tubes have good mechanical properties and are very strong. They are widely used in transporting fluids and gases, automobile manufacturing units, protecting underground electric wirings, etc. Being one of the top Steel Pipes Tubes Distributor in the country we thrive to supply these products using the fastest and the most efficient ways.

Steel Pipes Tubes

Steel Pipes Tubes

Tenaris Pipes

Tenaris Pipes

Remi Steel Pipes

Remi Steel Pipes


Tubacex Tubes Traders in India, We stock Nippon Steel Pipes in Mumbai

Steel pipe tubes can either be seamless or welded. We have a Stockist of tenaris pipes and tubes. All of these products are available at all our outlets. These pipes possess excellent strength and are highly wear-resistant. We also are the Stockist of Sanyo Special Steel Pipes. Having different notable features from stainless steel to corrosion resistance. We are the Stockholder of Top Steel Pipe Manufacturers. We ensure that these pipes along, with all other products, are properly wrapped and covered. This ensures that they are not damaged from physical and natural elements during transport.

The Ready stock of Tubacex Pipes materials has some of the best seamless tubings material. The material has a composition of some stabilized grade of raw materials. Their outer diameter ranges from 3- 219 mm. These products are highly durable and can be transported to your address within days of booking at any of our outlets. We stock Nippon Steel and Sumitomo Metal Pipes, which can be customized in different shapes and sizes to meet all your requirements. If you have any questions regarding the steel pipe tubes, contact us for more information.


Tenaris Pipe grades and sizes

Grades

  • HS-70™
  • HS-80™
  • HS-90™
  • HS-110™

Sizes

O.D.: 1” through 5”

Walls

0.080” through 0.300”


Product Range Of Zenith Steel ERW Pipes

  • Pipe Diameter: 1/2" to 8"
  • Thickness: 2 mm to 8 mm
  • Length: As per customer's requirement (Maximum upto 12 meters)
  • Capacity
  • >> For Black Pipes: 2,10,000 MT / Annum
    >> For Galvanised Pipes: 1,50,000 MT / Annum

Remi Steel Pipes Product Range

Products Made

O.D.Range
(mm)

Wall Thickness
(mm)

Grades (TP)

Specifications

S.S.Condesor Tubes

15 to 38

0.5 to 1.5

TP 304,TP 316,& TP 317 (all L grades),UNS 31803,32205

ASTM A-249& A-790

S.S.L P/HP Heater

15 to 22

0.5 to 2.50

TP 304,TP 316

ASTM A-688

S.S.Heat Exchanger Tubes

12 to 50

0.5 to 3.0

TP 304,TP 316,UNS 31803,32205

ASTM A-249,A-269 & A-790,A-688


We have wide distributing network of Kobe Steel Tube & Eisenbau Kramer Pipes

Remi Steel Pipes Unique Characteristics

Products Category Unique Characteristics
Condenser Tubes for power utilities Total online operations
LP/HP Heaters for power utilities

Lengths upto 30 meters.

Heat Exchanger tubes for sea water application & Oil,Petro-chem,Fertiliser & other Industries 100% Pneumatic Testing
Helium Leak Test
Non-standard dimensions on customer¡¯s request
Bright Annealing
Residual stresses
Online Dimensional check
Eddy Current Testing

HMT Stainless Steel Pipes & Tubes Product Range

ERW Steel Pipe

Product: ERW (Electric Resistance Welded ) Steel Pipe, ERW Carbon Steel Pipe
Application: Used for Oil/Gas/Water transmission,Machinery Manufacturing
Size: OD: 21.3-660mm
WT: 1.0-20mm
LENGTH: 5.8/6/11.8/12m
Pipe Standard: API 5L PSL1/PSL2 Gr.A,Gr.B,X42,X46,X52,X56,X60,X65,X70
ASTM A53 ASTM A500 JIS G3466
ASTM A252 ASTM A178
AN/NZS 1163 AN/NZS 1074
EN10219-1 EN10217-1

LSAW Steel Pipe

Product: LSAW pipe,Longitudinally Submerged Arc Welding Pipe
Application: Used for oil/gas/water Transmission,Engineering/Offshore projects.
Size: OD: 219mm-1625mm
WT: 7-50mm
LENGTH: 5.8/6/11.8/12m
Pipe Standard: API 5L PSL1/PSL2 Gr.A,Gr.B,X42,X46,X52,X56,X60,X65,X70
ASTM A53 ASTM 572 ASTM A252
AN/NZS 1163 AN/NZS 1074
EN10219-1 EN10217-1

SSAW Steel Pipe

Product: SSAW Pipe,Spirally Submerged Arc Welding Pipe, Sprial Steel Pipe
Application: Used for Oil/Gas/Water transmission,Construction & Structure Parts
Size: OD: 219mm-4064mm
WT: 3.2-40mm
LENGTH: 5.8/6/11.8/12m
Pipe Standard: API 5L PSL1/PSL2 Gr.A,Gr.B,X42,X46,X52,X56,X60,X65,X70
ASTM A53 ASTM 139
ASTM A252 Grade 1/2/3
AN/NZS 1163
EN10219-1 EN10217-1 EN10208

Tubacex Pipes Materials, Standards and Process

By Materials:

  • Stainless steels: austenitics, including stabilized grades.
  • Martensitics.
  • High Nickel alloys.
  • Ferritic – austenitic: Duplex and Superduplex

By Standards:

  • ASTM, ASME, DIN, EURONORM, ISO, BS, AFNOR, JIS, GOST
  • Other technical specifications upon request.

By Process:

  • Hot Finished Seamless Stainless Steel Pipes
  • Cold Finished Seamless Stainless Steel Pipes
  • Welded and drawn tubing

Traders of Arvind Steel Pipe and Dmv Stainless Tubes

Sanyo Special Steel Pipes Major Grades

Austenitic group

Characterized by high cold workability due to high corrosion resistance, ductility and toughness.

Martensitic group A wide range of mechanical properties can be provided because the steel can be hardened by quenching.
Ferritic group The formability and corrosion resistance are higher compared with martensitic steel. The steel also features high weldability.
Duplex group Features high resistance to pitting corrosion, intergranular corrosion and stress corrosion cracking, with higher strength than austenitic steel.
Precipitation group Strength of the steel can be enhanced by precipitation hardening treatment. The steel is superior to martensitic stainless steel in toughness, corrosion resistance and weldability.

SeAH Steel Tubes

SeAH Steel laid the foundation of the Korean steel pipe industry half a century ago in the 1960s when no steel industry existed. SeAH Steel has lead the development of the local steel pipe industry with a pioneering spirit by always leading changes and with an undaunted courage that does not evade crises.


Scope Of Production of Sosta Stainless Steel Pipes

  • ASTM A312
  • ASTM A358 Class 1, 2, 3, 4, 5
  • ASTM A790
  • ASTM A928 Class 1, 2, 3, 4, 5
  • API5LC
  • ASTM B775
  • EN10217-7 TC 1/2
  • Customer specification

Distributor and Dealer of Ismt Pipe and Suraj Pipes

Suraj Stainless Steel Seamless Pipes Specifications List

Grade: TP304/304L, 304H, TP316/316L, 316Ti, TP317/317L, TP321/321H, TP347/347H, S31260, S31500,S31803, S32550, S32750, S32760.
Size: 1/8″ NB TO 12″ NB
Thickness: Sch 5s, 10s, 40s, 80s, 160, XXS
Specifications: ASTM A-312, A-790, Equivalent to ASME, EN, JIS Etc.
Applications: Nuclear Power Plants, Oil & Gas, Petrochemical & Refinery, Chemical & Fertilizer,Power Plant & All major process industries.

Man Industries Hsaw Pipes Product Parameters

Outside Diameter
Wall Thickness
Pipe Length (max)
Grade
18" to 120"
6 mm to 25.40 mm
18 meters
Up to API 5L X-80

Mukat Pipes Sizes & Schedule

  • Size Range: In ERW, LSaw, SSaw, Spiral, DSaw, EFW 6" to 100"
  • Schedules : 20, 30, 40, Standard (STD), Extra Heavy (XH), 80, 100, 120, 140, 160, XXS

Grades

  • A 53, ASTM A 106 GR A/B/C,
  • AP15L Gr. B, X42, X46, X52, X56, X60, X65, X70 PSL 1 & PSL 2 WITH NACE MR 0175,
  • IS 3589 (BLACK GR 330 & GR 410) SAW 672.
  • ASTM A 671 / 672 GRCB60 / CB60 / CC60 PIPE

Nippon Steel & Sumitomo Metals Line Pipes Applicable Specification

1. Line Pipes

API 5L

Line Pipe
(Grade B X42, X46, X52, X56, X60, X65, X70, X80)

BS 3602Steel Pipe and Tubes for Pressure Proposes Carbon Steel: High Duties.
DIN 17172Stahlrohre fur Fernleitungen fur brennbare Flussingkeiten und Gase( Pipe for cross country pipelines for flammable liquid and gas)
ISO 3183Petroleum and Natural Gas Industries – Steel Pipe for Pipelines-
DNV OS-F101Submarine Pipeline Systems (Applicable Design Code)

2. Pipe for General Uses

ASTM A134

Electric Fusion-(Arc) Welded Steel Plate Pipe

ASTM A139Electric Fusion-(Arc) Welded Steel Pipe
ASTM A155Electric Fusion Welded Steel Pipe for High Temperature Service
ASTM A671Electric Fusion Welded Steel Pipe for Atmospheric and Lower Temperature
ASTM A672Electric Fusion Welded Steel Pipe for High-Pressure Service and Moderate Temperatures
BS 3601Steel Pipe and Tubes for Pressure Proposes Carbon Steel:Ordinary Duties
DIN 1626Geschweisste Stahlrohre; Technische Liefebedingungen; (Fusion Welded Steel Pipe;Technical Specification)
JIS G3457Electric Arc-Welded Steel Pipe

3. Structural Pipe

ASTM A252

Welded Pipe Pile

JIS G3444Carbon Steel Pipe for General Structural Purposes
JIS A5525Steel Pipe Pile
API 2BFabricated Structural Steel Pipe

ESW Plain Tubes

STEEL TUBES FOR MACHINING AND FOR MECHANICAL ENGINEERING
Seamless steel tubes acc. to DIN EN 10297-1 and DIN 1629







DIN EN 10297-1:Seamless circular steel tubes for mechanical and general engineering purposes
Steel grades:e.g. E235, E355
DIN 2448/1629 (replaced):Seamless circular steel tubes made from non-alloy steel for special applications
(DIN 2448 [replaced]):Plain end seamless steel tubes: Dimensions and conventional masses per unit length
Steel grades:e.g. St 37.4, St 52
Fields of application:
Apparatus engineering, vessel construction, linepipe, general mechanical engineering and tool-building

TUBES FOR STRUCTURAL STEEL CONSTRUCTIONS OF PLAIN STRUCTURAL STEELSSeamless steel tubes acc. to DIN EN 10210 and DIN 17121

DIN EN 10210-1:Hot-finished structural hollow sections of non-alloy
and fine-grain steels
Steel grades:e.g. S235JRH, S275J0H,S355J2H,
DIN EN 10210-2:Hot-rolled structural hollow sections of non-alloy and fine-grain steels. Tolerances, dimensions and sectional properties
DIN 2448/17121 (replaced):Seamless structural steel circular tubes for structural engineering purposes
(DIN 2448 [replaced]): Plain end seamless steel tubes:
Dimensions and conventional masses per unit length
Steel grades:e.g. RSt 37-2, St 44-2, St 52-3
Fields of application:
Structural engineering, bridge and crane construction

Specification of Inox Tech Pipes

  • Large diameter (up to 100") / heavy wall welded pipes (up to 60mm)
  • Unit length up to 12 mtrs with no circular joints
  • Pipes produced by plate, welded and calibrated, ID/OD tight tolerances
  • Stainless / Duplex / Ni alloys / Clad / Carbon
  • Production capacity up to 25.000 tons per year
  • Advanced welding techniques
  • Mill approved by Shell, Total, Aramco, PDO, Exxon, Statoil and others

Sizes, Mechanical Properties of ISMT High Collapse Casing Pipes

DIMENSION(STANDARD DRIFT)ISMT 55 HC ISMT 80 HC  ISMT 110 HC  Pipe InspectionColour
Coding for
coupling
Outside DiameterWeightWall Thickness Y.S.RANGEU.T.S Min Y.S.RANGEU.T.S Min Y.S.RANGEU.T.S Min
Ksi (Mpa) Ksi (Mpa) Ksi (Mpa) Ksi (Mpa)Ksi (Mpa)Ksi (Mpa)
55 (379)-80 (552)95 (655) 80 (552)-110 (758) 110 (690) 110(758)-140 (965) 125 (862)
Collapse Pressure
INCH / MM PPEKG / MTR INCHMMPSIMPAPSIMPAPSIMPA
4-1/2 114.3 10.515.620.2245.69541437.33666645.97750151.73 
11.617.260.2506.35669646.18857359.121023370.57
13.520.090.2907.37540937.311152979.511443299.53
15.122.470.3378.561029070.9614967103.2219359133.51
5
127
1319.340.2536.43558938.54694247.87876860.47 
1522.320.2967.52750651.77978867.501194882.40 
1826.780.3629.19997468.781416297.6718185125.41ISMT 55 HC
21.431.840.43711.101184681.7017226118.8023693163.40
23.234.520.47812.141284088.5518671128.7625677177.08ISMT Green Block
24.135.860.50012.701336592.1719440134.0726730184.34
5-1/2
139.7
1420.830.2446.20421229.05488633.69602941.58 
15.523.060.2756.99545437.61674146.49848658.52 
1725.300.3047.72662945.71849258.561009869.64
2029.760.3619.17892861.571192182.2114985103.34 
2334.220.41510.541111676.6615066103.901629135.37 
6-5/8
168.3
2029.760.2887.32401027.65457131.52575539.69
2435.710.3528.94615642.46777653.63908662.66
2841.660.41710.59833157.451103076.071371694.59
3247.620.47512.07988268.151393296.0817847123.08 
7
177.8
2334.220.3178.05441530.44517135.66631043.52 
2638.690.3629.19584640.31730450.37841158.00ISMT 80 HC
2943.150.40810.36729550.31949165.451151679.42
3247.620.45311.51872960.201161080.0714553100.37ISMT Red Block
3552.080.49812.65981067.661374394.7817591121.31
3856.540.54013.721057572.9315377106.0420426140.87
7-5/8
193.68
29.744.190.3759.53527936.40646744.60722349.81
33.750.150.43010.92688147.45885661.081062573.27
3958.030.50012.70891861.501190782.1214958103.16 
42.863.690.56214.271013769.9114594100.6418806129.69 
45.367.410.59515.111068073.6515539107.1620844143.75
47.170.080.62515.881117477.0616254112.1022343154.09
8-5/8
219.1
2435.710.2646.71185012.76193313.33193313.33
3247.620.3528.94341623.56411628.39569239.25ISMT 110 HC
3653.570.40010.16465832.12553538.17738350.92
4059.520.45011.43594040.97745251.39862759.49
4465.470.50012.70722949.86938364.711136778.39
4972.910.55714.15869359.951157079.791448699.90
9-5/8
244.48
3653.570.3528.94272718.81320522.10366925.31
4059.520.39510.03347023.93417228.77502134.63
43.564.730.43511.05439030.28514435.47596741.15
4769.940.47211.99524636.18641344.22715549.34
53.579.610.54513.84693147.80893761.631073374.02
  

Application of Kobe Steel Pipes

  • Piping use for nuclear power plants, chemical industry and petrochemical industry
  • Heat exchanger use for power plant, Heat exchanger use for power plant
  • Mother tubes for redrawing
  • Industrial machinery use

Lalit Pipes Specification & Applications

SpecificationApplication
IS 3589Steel Pipes for Water & Sewage
API - 5LSteel Pipes for pipeline transportation systems
API 2BStructural Steel Pipes
ASTM-A 671EFW Steel Pipes for Atmospheric and Low Temperatures
ASTM-A 672EFW Steel Pipes for High Pressure Service at Moderate Temperatures
ASTM-A 691EFW word to be added before the text – “EFW Carbon & Alloy Steel Pipes for high pressure service at high temperatures"

Lloyds Line Pipes Limited :: API PIPES

SizesLength (ft)Types
O.D (Inch)W.T InchTolerances - 0 / + 2- Max
1/2" - 2 1/2" (Tubes)0.065" - 0.095"8 - 24 ft MaxBlack & Galvanized
1/2" - 3"0.078" - 0.157"24 ft Max.(For 2 1/2" & 3")Black & Galvanized
1 1/4" - 8"0.157" - 0.275"24 ft Max.(Upto 3 ")
42 ft Max. (3 ½ " - 8 ")
Galvanized-Size: 1/2" to 6"
Black - Size: 1/2" to 8"
3 1/2" - 14"0.197" - 0.374"18 - 42 ft. MaxGalvanized-3 1/2" to 6“
Black - : 3 1/2" to 14"
3 1/2" - 14"0.197" - 0.324"18 ft to 42 ft Max.API 5L Pipes, Grade A upto X52
3 1/2" - 14"0.197" - 0.324"18 ft to 42 ft Max.API 5CT Pipes (PSL1)

DMV Stainless Italia Cold Finished Tubes Tolerance

DMV Stainless Italia Cold Finished Tubes


Application of EEW Ofshore Pipes

  • Steel pipes and cones for Legs, Bracings, Piles and Caissons
  • Pre-fabricated Legs*
  • Pre-fabricated Bracings, including profiling
  • Pre-fabricated Sleeves and Conductor Guides
  • Complete Monopiles and Transition Pieces*
  • Piles for Jackets and Tripods*
  • Suction Piles
  • Point-to-Point Construction Service
  • Installation tools and equipment (Followers, Spreader Bars, Ballast Weights etc.)
  • Riser Pipes and Bends including all kinds of coatings

Eisenbau Kraemer Power Plant Pipes Products & Requirements

Requirements:

  • Heat resistance
  • Reliability and high quality
  • Improved efficiency by increasing the operating temperatures

Products

  • Gr. 91 and Gr. 92
  • ASTM A 387 Gr. 11 bis Gr. 9
  • DIN EN 13CrMo4-5; 10CrMo9-10;
  • X10CrMoVNb 9-1

Specification & Tolerance Arvind Seamless Pipes & Tubes

SpecificationAllowable Outside Diameter Variation in mmAllowable Wall Thickness VariationExact Length Tolerance in mmTesting
Nominal DiameterOverUnder%Over%UnderOverUnder
ASTM-A213
Seamless Boiler
Superheater and 
Heat Exchanger Tubes
Under 25.4.1016.1016+20-03.1750Flattening Test
25.4-38.1 incl.1524.1524+22-03.1750Tension Test
38.1-50.8 excl.2032.2032+22-03.1760Flare Test
50.8-63.5 excl.254.254+2-04.460Hardness Test
63.5-76.2 excl.3048.3048+22-04.760100% Hydrostatic test
76.2-101.6 incl.381.381+22-04.760Refer to ASTM A-450
ASTM-A249
Welded Boiler Superheater, Heat Exchanger And Condenser Tubes
Under 25.4.1016.1016+10-103.1750Tension Test
25.4-38.1 incl.1524.1524+10-103.1750Flattening Test
38.1-50.8 Excl.2032.2032+10-103.1750Flange Test
50.0-63.5 excl.254.254+10-104.7620Reverse Bend Test
63.5-76.2 excl.3848.3848+10-104.7620Hardness Test
76.2-101.6 incl.381.381+10-104.7620100% Hydrostastic Test Refer to ASTM A-450
Minimum Wall tubes +18% 0 available On request
ASTM-A269
Seamless & Welded Tubing for General Service
Untp12.7.13.13+15-153.20Flare Test (Seamless Only)
12.7-38.1 exc!.13.13+10-103.20Flange Test (Welded Only)
38.1-88.9 excl.25.25+10-104.80Hardness Test
88.9-139.7 excl.38.38+10-104.80Reverse Flattening Test
139.7-203.2 excl.76.76+10-104.80(Welded only) 
100% Hydrostatic Test Refer to ASTM-A269
ASTM-A270
Seamless & Welded
Sanitary Tubing
25.4.05.20+10.0-10.03.20Reverse flattening Test
38.1.05.20+10.0-10.03.20100% Hydrostastic Test
50.8.05.28+10.0-10.03.20External' polish on all tubes
60.5.05.28+10.0-10.03.20Refer to ASTM A-270
76.2.08.30+10.0-10.03.20
101.6.08.38+10.0-10.03.20
ASTM-A312
Seemless & Welded
pipe
3.175-38.1 incl.4.79Minimum Wall 12.5% under nominal wall Specified6.4 00Tension Test
38.1-1016 incl.79.796.4 00Flattening Test
101.6-203.2 imcl1.59.796.4 00100% Hydrostatic Test
(Normally Random Lengths orderedRefer to ASTM A-530
ASTM A-358
Welded pipe
219.08-750mm or 0.01 inch+0.5%-0.36.0Refer to ASTM A-530

whatsapp chat