ASTM A312 Sch 40 SS Pipe and ASME SA 213 Seamless Tube supplier in India

Seamless pipe is produced from a single piece of metal sheet. A Stainless Steel Seamless Pipe can withstand heavy loads of pressure as compared to other pipes. Apart from this, they are cost-effective and readily available. This Stainless Steel Tube can be produced by hot-rolling and then enhanced using the cold-rolling process. These seamless tubes have good corrosion resistance and mechanical properties. ASME B36.19 Stainless Steel Pipe is used in high and low-temperature applications. These seamless pipes are widely used in marine, commercial, industrial equipment, etc. We are one of the top stainless steel tube manufacturers in India. Our goal is to produce high-quality products at the most reasonable prices for all. We are leading Stainless Steel Pipe suppliers in India

Stainless Steel Pipe

Stainless Steel Pipe

ASTM A312 Sch 40 SS Pipe

ASTM A312 Sch 40 SS Pipe

ASME SA 213 Seamless Tube

ASME SA 213 Seamless Tube


Supplier of ASME B36.19 SS Pipe in Various Sizes, We have Ready Stock of 1 inch to 6 inch Diameter Stainless Steel Seamless Tubes.

The stainless steel rectangular tube is formed by using a series of coils, which are then run over dies. To get these pipes into the desired shape, they are welded from the interior. The SCH 40 ASTM A249 Round Tube is designed with a single billet. These tubes can be also welded if there is a need. These pipes are measured using the outer diameter and wall thickness. We are one of the few stainless steel pipe supplier in India that provide customized pipes, which can be grooved and cut as per your requirements.

The ASTM A312 Stainless Steel boiler pipe is extremely strong and can withstand extreme temperatures. These pipes are used in boilers to heat water with invariably produces steam in industrial units. Stainless Steel Schedule 40 Pipe is a heavy-duty pipe that has a smooth interior and is widely used in many applications. All our products are produced using the best products and the latest technology. If you have any questions about our Stainless Steel Seamless Tubes, and other products, contact us.

Stainless Steel Pipe Supplier in India
Stainless Steel Pipe Supplier in India


Stainless Steel Seamless Pipe Specification

Specifications A312 / SA312
International standards JIS, GOST, BS -UNI, EN, DIN -NF A, ASTM/ASME, ISO, GB 5310
Sizes 5.0 mm - 1219.2 mm
Origin Korean, Indian, European, US, Japanese, Ukraine, Russian
Form Rectangular, Hollow, Square, Round, “U” Shape, Hydraulic, Coiled, Straight Pipes etc.
Thickness 0.3 milimeter – 50 milimeter
Finish Polished, Annealed and Pickled, Bright and Annealed, etc
Standard AISI, DIN, ASTM, EN, GB, JIS, ASME
Length Single Random, Double Random, Cut length
Schedule Chart Schedule 160, 10, XXS, 5, 80S, 40, 80, XS Stainless Steel Pipe Suppliers
End Beveled End, Plain End, Treaded.
Export to Qatar, Kenya, Iran, Indonesia, Colombia, France, Saudi Arabia (KSA), Italy, Oman, Netherlands, Singapore, South Africa, Greece, Kuwait, South Korea, Brazil, Bangladesh, Myanmar (Burma), Mexico, Iraq Vietnam, Japan, Australia, Romania, United Kingdom (UK), Pakistan, United States (USA), United Arab Emirates (UAE), Taiwan, Jordan, Nepal, Germany, Malaysia, Philippines, Turkey, Sri Lanka, Thailand, Hong Kong, Canada, Spain, Chile, Nigeria, Belgium, Egypt, Poland, China
Sizes 5.0 mm - 1219.2 mm
Testing Provided By Supplier H2 SERVICE, NACE TM0177, NACE TM0284, SSC TEST, NACE MR0175, HIC TEST, IBR, etc.
Outer Diameter Sizes up to 12" NB, 6.00 MM Other Diameter up to 250 milimeter Other Diameter

Refer Schedule 10 Stainless Steel Pipe Price List

Price list of Stainless Steel Seamless Pipe ASTM A312 Stainless Steel Pipes Price in India (INR) ASTM A312 Stainless Steel Pipes Price in USD ASTM A312 Stainless Steel Pipes Price in UAE Dirham

ASTM A 312 GRADE: TP-304L SIZE(3 INCH X 88.9 MM OD X 3.05 MM THK)

INR 144 1.92 USD 7.06 UAE Dirham

ASTM A 312 GRADE: TP-304L SIZE(1 INCH X 33.4 MM OD X 4.55 MM THK)

INR 144 1.92 USD 7.06 UAE Dirham

Many Stainless Steel Pipe stockists, suppliers, stockholders, dealers, retailers, distributors, exporters, wholesalers and importers prefer to buy from Hi-tech Metal & Tubes for the best price of ASTM A312 Sch 40 SS Pipe in India, View our Latest Stock List to Purchase exact ASME SA 213 Seamless Tube sizes.

Stainless Steel Tube Manufacturers In India, Dealer and Distributor of Large Diameter Polished ASTM A312 SS Pipe

Stainless Steel Pipe & Tube Chemical Composition

Grade C Mn Si P S Cr Mo Ni N Ti Fe
304 min. 18.0 8.0
max. 0.08 2.0 0.75 0.045 0.030 20.0 10.5 0.10
304L min. 18.0 8.0
max. 0.030 2.0 0.75 0.045 0.030 20.0 12.0 0.10
304H min. 0.04 18.0 8.0
max. 0.010 2.0 0.75 0.045 0.030 20.0 10.5
SS 310 0.015 max 2 max 0.015 max 0.020 max 0.015 max 24.00 26.00 0.10 max 19.00 21.00 54.7 min
SS 310S 0.08 max 2 max 1.00 max 0.045 max 0.030 max 24.00 26.00 0.75 max 19.00 21.00 53.095 min
SS 310H 0.04 0.10 2 max 1.00 max 0.045 max 0.030 max 24.00 26.00 19.00 21.00 53.885 min
316 min. 16.0 2.03.0 10.0  
max. 0.035 2.0 0.75 0.045 0.030 18.0 14.0  
316L min. 16.0 2.03.0 10.0    
max. 0.035 2.0 0.75 0.045 0.030 18.0 14.0  
316TI 0.08 max 10.00 14.00 2.0 max 0.045 max 0.030 max 16.00 18.00 0.75 max 2.00 3.00
317 0.08 max 2 max 1 max 0.045 max 0.030 max 18.00 20.00 3.00 4.00 57.845 min
SS 317L 0.035 max 2.0 max 1.0 max 0.045 max 0.030 max 18.00 20.00 3.00 4.00 11.00 15.00 57.89 min
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 19.00 9.00 12.00 0.10 max 5(C+N) 0.70 max
SS 321H 0.04 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 19.00 9.00 12.00 0.10 max 4(C+N) 0.70 max
347/ 347H 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 20.00 9.0013.00
410 min. 11.5
max. 0.15 1.0 1.00 0.040 0.030 13.5 0.75
446 min. 23.0 0.10
max. 0.2 1.5 0.75 0.040 0.030 30.0 0.50 0.25
904L min. 19.0 4.00 23.00 0.10
max. 0.20 2.00 1.00 0.045 0.035 23.0 5.00 28.00 0.25

Stainless Steel Pipe & Tube Mechanical Properties

Grade Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
304/ 304L 8.0 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
304H 8.0 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 40 %
310 / 310S / 310H 7.9 g/cm3 1402 °C (2555 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 40 %
306/ 316H 8.0 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
316L 8.0 g/cm3 1399 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
317 7.9 g/cm3 1400 °C (2550 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
321 8.0 g/cm3 1457 °C (2650 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
347 8.0 g/cm3 1454 °C (2650 °F) Psi 75000 , MPa 515 Psi 30000 , MPa 205 35 %
904L 7.95 g/cm3 1350 °C (2460 °F) Psi 71000 , MPa 490 Psi 32000 , MPa 220 35 %

Stainless Steel Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304 1.4301 S30400 SUS 304 304S31 08Х18Н10 Z7CN18‐09 X5CrNi18-10
SS 304L 1.4306 / 1.4307 S30403 SUS 304L 3304S11 03Х18Н11 Z3CN18‐10 X2CrNi18-9 / X2CrNi19-11
SS 304H 1.4301 S30409
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 X8CrNi25-21
SS 310H S31009
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3
SS 316H 1.4401 S31609
SS 316Ti 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2
SS 317 1.4449 S31700 SUS 317
SS 317L 1.4438 S31703 SUS 317L X2CrNiMo18-15-4
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9
SS 347 1.4550 S34700 SUS 347 08Ch18N12B X6CrNiNb18-10
SS 347H 1.4961 S34709 SUS 347H X6CrNiNb18-12
SS 904L 1.4539 N08904 SUS 904L 904S13 STS 317J5L Z2 NCDU 25-20 X1NiCrMoCu25-20-5

ASTM A312 Pipe Weight

PIPE SIZE OD IN INCHES A.S.A. Pipe Schedules
5s 5 10s 10 40s & Std. 40 60 80s & E.H. 80 120 160 DBL E.H.
1/8 .405   .035.1383 .049.1863 .049.1863 .068.2447 068.2447   0.95.3145 0.95.3145      
1/4 .540   .049.2570 .065.3297 .065.3297 .088.4248 088.4248   .119.5351 .119.5351      
3/8 .675   .049.3276 .065.4235 .065.4235 .091.5676 .091.5676   .126.7338 .126.7338      
1/2 .840 .065.5383 .065.5383 .083.6710 .083.6710 .109.8510 .109.8510   .1471.088 .1471.088   .1871.304 .2941.714
3/4 1.050 .065.6838 .065.6838 .083.8572 .083.8572 .1131.131 .1131.131   .1541.474 .1541.474   .2181.937 .3082.441
1 1.315 .065.8678 .065.8678 .1091.404 .1091.404 .1331.679 .1331.679   .1792.172 .1792.172   .2502.844 .3583.659
1-1/4 1.660 .0651.107 .0651.107 .1091.806 .1091.806 .1402.273 .1402.273   .1912.997 .1912.997   .2503.765 .3825.214
1-1/2 1.900 .0651.274 .0651.274 .1092.085 .1092.085 .1452.718 .1452.718   .2003.631 .2003.631   .2814.859 .4006.408
2 2.375 .0651.604 .0651.604 .1092.638 .1092.638 .1543.653 .1543.653   .2185.022 .2185.022   .3437.444 .4369.029
2-1/2 2.875 .0832.475 .0832.475 .1203.531 .1203.531 .2035.793 .2035.793   .2767.661 .2767.661   .37510.01 .55213.70
3 3.500 .0833.029 .0833.029 .1204.332 .1204.332 .2167.576 .2167.576   .30010.25 .30010.25   .43714.32 .60018.58
3-1/2 4.000 .0833.472 .0833.472 .1204.973 .1204.973 .2269.109 .2269.109   .31812.51 .31812.51     .63622.85
4 4.500 .0833.915 .0833.915 .1205.613 .1205.613 .23710.79 .23710.79 .28112.66 .33714.98 .33714.98 .43719.01 .53122.51 .67427.54
4-1/2 5.000         .24712.53     .35517.61       .71032.53
5 5.563 .1096.349 .1096.349 .1347.770 .1347.770 .25814.62 .25814.62   .37520.78 .37520.78 .50027.04 .62532.96 .75038.55
6 6.625 .1097.585 .1097.585 .1349.290 .1349.290 .28018.97 .28018.97   .43228.57 .43228.57 .56236.39 .71845.30 .86453.16
7 7.625         .30123.57     .50038.05       .87563.08
Medium Type = Wall thickness in inches Bold Type = Steel weight per foot in pounds

Diameter Tolerance of A312 Stainless Steel Pipe

NPS ASTM A312 OD Tolerance
+
inch mm inch mm
1/8~1 1 /2 1/64(0.015) 0.4 1/32(0.031) 0.8
> 1 1 /2~4 1/32(0.031) 0.8 1/32(0.031) 0.8
> 4~8 1/16(0.062) 1.6 1/32(0.031) 0.8
> 8~18 3/32(0.093) 2.4 1/32(0.031) 0.8
> 18~26 1/8(0.125) 3.2 1/32(0.031) 0.8
> 26~34 5/32(0.156) 4 1/32(0.031) 0.8
> 34~48 3/16(0.187) 4.8 1/32(0.031) 0.8

EN Standard of Stainless Steel Pipe

process standard European
Seamless EN 10216-5
Seamless EN 10297-2

ASTM A312 SS Pipe Types

Stainless Steel Seamless Pipe

Stainless Steel Seamless Pipe

Stainless Steel tubing

Stainless Steel tubing

6 Ft. Seamless Stainless Steel Tubing, 1/2 Outside Dia., 0.430 Inside Dia.

6 Ft. Seamless Stainless Steel Tubing, 1/2" Outside Dia., 0.430" Inside Dia.

5 In. Od 14 Ga Schedule 80 304l Stainless Steel Tube

5 In. Od 14 Ga Schedule 80 304l Stainless Steel Tube

1 X 0.065 In. Stainless Steel Tubing

1 X 0.065 In. Stainless Steel Tubing

2 In. Schedule 160 Stainless Steel Seamless Pipe

2 In. Schedule 160 Stainless Steel Seamless Pipe

1-1/2 In. Schedule 40 Stainless Steel Pipe

1-1/2 In. Schedule 40 Stainless Steel Pipe

3/8 X 18 In. Threaded Schedule 40 Stainless Steel Pipe

3/8 X 18 In. Threaded Schedule 40 Stainless Steel Pipe

ASME B36.19 Stainless Steel Pipe

ASME B36.19 Stainless Steel Pipe

ASTM A312 Stainless Steel Pipe

ASTM A312 Stainless Steel Pipe

2 inch stainless steel pipe

2 inch stainless steel pipe

polished stainless steel tubing

polished stainless steel tubing

EN 10217-7 Stainless Steel Pipe

EN 10217-7 Stainless Steel Pipe

ASTM A213 Stainless Steel Tubing

ASTM A213 Stainless Steel Tubing

Thick wall stainless steel tube

Thick wall stainless steel tube

Thin Wall Stainless Steel Pipes

Thin Wall Stainless Steel Pipes

25mm od stainless steel tube

25mm od stainless steel tube

4 inch stainless steel pipe

4 inch stainless steel pipe

25mm stainless steel tube

25mm stainless steel tube

1 inch stainless steel tubing

1 inch stainless steel tubing

thin wall stainless steel tube

thin wall stainless steel tube

20mm diameter stainless steel pipe

20mm diameter stainless steel pipe

10mm stainless steel tube

10mm stainless steel tube

ASTM A213 Stainless Steel Seamless Pipe

ASTM A213 Stainless Steel Seamless Pipe

ASME B36.10 SS Electropolish Pipe

ASME B36.10 SS Electropolish Pipe

Stainless Steel Schedule 10 Pipe

Stainless Steel Schedule 10 Pipe

EN 10217-7 Stainless Steel round pipe

EN 10217-7 Stainless Steel round pipe


Schedule Chart of SS Seamless Pipe

OD Inches Pipe Size TRUE 5 5s 20 30 10s TRUE 10 60 40s & STD
0.00405 1/8 0.0035 0.0049 0.0049 0.0068
0.001383 0.001863 0.001863 0.002447
0.0054 1/4 0.0049 0.0065 0.0065 0.0088
0.00257 0.003297 0.003297 0.004248
0.00675 3/8 0.0049 0.0065 0.0065 0.0091
0.003276 0.004235 0.004235 0.005676
0.0084 1/2 0.0065 0.0065 0.0083 0.0083 0.00109
0.005383 0.005383 0.00671 0.00671 0.00851
1.005 3/4 0.0065 0.0065 0.0083 0.0083 0.00113
0.006838 0.006838 0.008572 0.008572 1.0131
1.0315 1 0.0065 0.0065 0.00109 0.0019 0.00133
0.008678 0.008678 1.0404 1.0404 1.0679
1.066 1 1/4 0.0065 0.0065 0.00109 0.00109 0.0014
1.0107 1.0107 1.0806 1.0806 2.0273
1.09 1 1/2 0.0065 0.0065 0.00109 0.00109 0.00145
1.0274 1.0274 2.0638 2.0638 2.0718
2.0375 2 0.0065 0.0065 0.00109 0.00109 0.00154
1.0604 1.0604 2.0638 2.0638 3.0653
2.0875 2 1/2 0.0083 0.0083 0.0012 0.0012 0.00203
2.0475 2.0475 3.0531 3.0531 5.0793
3.05 3 0.0083 0.0083 0.0012 0.0012 0.00216
3.0029 3.0029 4.0332 4.0332 7.0576
4 3 1/2 0.0083 0.0083 0.0012 0.0012 0.00226
3.0472 3.0472 4.097 4.097 9.0109
4.05 4 0.0083 0.0083 0.0012 0.0012 0.00281 0.00237
3.0915 3.0915 5.0613 5.0613 12.066 10.0079
5 4 1/2 0.00247
12.053
5.0563 5 0.00109 0.00109 0.00134 0.00134 0.00258
6.0349 6.0349 7.077 7.077 14.062
6.0625 6 0.00109 0.00109 0.00134 0.00134 0.0028
7.0585 7.0585 9.0289 9.0289 18.097
7.0625 7 0.00301
23.057
8.0625 8 0.00109 0.00109 0.0025 0.00277 0.00148 0.00148 0.00406 0.00322
9.0914 9.0914 22.036 24.07 13.04 13.04 35.064 28.055
9.0625 9 0.00342
33.09
10.0075 10 0.00134 0.00134 0.0025 0.00307 0.00165 0.00165 0.005 0.00365
15.019 15.019 28.004 34.024 18.065 18.065 54.074 40.0048
11.075 11 0.00375
45.055
12.075 12 0.00165 0.00156 0.0025 0.0033 0.0018 0.0018 0.00562 0.00375
22.018 21.007 33.038 43.077 24.02 24.02 73.016 49.056
14 14 0.00156 0.00312 0.00375 0.00188 0.0025 0.00593 0.00375
23.006 45.068 54.057 27.073 36.071 84.091 54.057
16 16 0.00165 0.00312 0.00375 0.00188 0.0025 0.00656 0.00375
27.09 52.036 62.058 31.075 42.005 107.05 62.058
18 18 0.00165 0.00312 0.00437 0.00188 0.0025 0.0075 0.00375
31.043 59.003 82.006 35.076 47.039 138.02 70.0059
20 20 0.00188 0.00375 0.005 0.00218 0.0025 0.00812 0.00375
39.078 78.06 104.01 46.005 52.073 166.04 78.06
24 24 0.00218 0.00375 0.00562 0.0025 0.0025 0.00968 0.00375
55.037 94.062 140.008 63.041 63.041 238.01 94.062
26 26 0.005 0.00312 0.00375
136.02 85.06 102.06
28 28 0.005 0.00625 0.00312 0.00375
146.08 182.07 92.026 110.006
30 30 0.0025 0.005 0.00625 0.00312 0.00312 0.00375
79.043 157.05 196.01 98.093 98.093 118.06
32 32 0.005 0.00625 0.00312 0.00375
168.02 209.04 105.06 126.07
34 34 0.005 0.00625 0.00312 0.00375
178.09 222.08 112.03 134.07
36 36 0.00625 0.00312 0.00375
236.01 118.09 142.07
40 40 0.00375
158.07
42 42 0.00375
166.07
48 48 0.00375
190.007

Applications of ASME SA 213 Seamless Tube

  • Architecture
  • Pharmaceutical
  • Automotive
  • Onshore & Offshore
  • Chemical
  • Defence
  • Nuclear
  • Machine Building

ASTM A312 Sch 40 SS Pipe Material Testing

  • Chemical/Mechanical test
  • Radiography test
  • Pitting resistance test
  • Hydrostatic test
  • Flattening/flaring test

Temperature Range of Stainless Steel tubing

Temperature Range 100 - 750 °F

Astm Standards For Stainless Steel Pipe And Tubing

ASTM A 268/A 268M-03 Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
ASTM A 269-02a Seamless and Welded Austenitic Stainless Steel Tubing for General Service
ASTM A 312/A 312M-03 Seamless and Welded Austenitic Stainless Steel Pipes
ASTM A 333/A 333M-99 Seamless and Welded Steel Pipe for Low-Temperature Service
ASTM A 554-03 Welded Stainless Steel Mechanical Tubing Note: Mechanical properties data are supplementary requirements, provided for information only.
ASTM A 632-02a Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
ASTM A 688/A 688M-03 Welded Austenitic Stainless Steel Feedwater Heater Tubes
ASTM A 778-01 Welded, Unannealed Austenitic Stainless Steel Tubular Products
ASTM A 803/A 803M-03 Welded Ferritic Stainless Steel Feedwater Heater Tubes

Manufacturing process of ASTM A312 Stainless Steel Pipe

  • Heating
  • Plercing
  • Manderel Mill
  • Heat Treatment
  • Stretch Reducing
  • Cooling
  • Sawing
  • Straightening / Heat Treatment
  • End Facing
  • Endy Current Inspection / Magnetic Particle Inspection
  • Visual Dimensional Inspection
  • Marking and Coating
  • Spectro-Chemical Analysis
  • Packaging

Schedule of ASTM A213 Stainless Steel Tubing

1/8" IPS(.405"O. D.) 3 1/2" IPS( 4.000"O. D.)
SCH 40, 80 SCH 10, 40, 80, 160, XXH
1/4" IPS(.540"O. D.) 4" IPS(4.500"O. D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
3/8" IPS(.675"O. D.) 5" IPS( 5.563"O. D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
1/2" IPS(.840"O. D.) 6" IPS(6.625"O. D.)
SCH 5, 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
3/4" IPS(1.050"O. D.) 8 ” IPS(8.625"O. D.)
SCH 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
1" IPS:(1.315′O. D.) 10" IPS(10.750"O. D.)
SCH 5, 10, 40, 80, 160, XXH SCH 10, 20, 40, 80 (.500), TRUE 80(.500)
1-1/4" IPS(1.660"O. D.) 12" IPS(12.750"O. D.)
SCH 10, 40, 80, 160, XXH SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)
1-1/2" IPS(1.900"O. D.) 14" IPS(14.000"O. D.)
SCH 10, 40, 80, 160, XXH SCH10 (.188), SCH40 (.375)
2" IPS(2.375"O. D.) 16" IPS(16.000"O. D.)
SCH 10, 40, 80, 160, XXH SCH10(.188), SCH40(.375)
2 1/2" IPS(2.875"O. D.) 18" IPS (18.000"O. D.)
SCH 10, 40, 80, 160, XXH SCH-40 (.375)
3" IPS( 3.500"O. D.)
SCH 5, 10, 40, 80, 160, XXH

Tolerance Chart of Stainless Steel Tube

Pipe OD Tolerance
4 to 35mm +/- 0.08mm
35 to 38mm +/- 0.15mm
38 to 60mm +/- 0.20mm
60 and above +/- 0.25mm

Wall Thickness Tolerance of EN 10217-7 SS Pipe

NPS ASTM A312 WT Tolerance, %
+
1/8-2 1 /2 20 12.5
3~18, t/D≤ 5% 22.5 12.5
3~18, t/D> 5% 15 12.5
≥ 20 17.5 12.5
≥ 20, seamless, t/D≤ 5% 22.5 12.5
≥ 20, seamless, t/D> 5% 15 12.5

FBE Coated & Food Grade Stainless Steel Pipe Suppliers and Stockist, Ready to Dispatch ASTM A249 SS Seamless Tubing in Range of 1mm od to 25mm od

ASME B36.19 Ss Pipe Finishing And Testing

PolishingManufacturers can polish any stainless steel pipe item to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish.
CuttingsStainless steel pipes can be produced in standard lengths or cut to size (standard lengths are 20′ and 40′ depending on the nominal pipe size).
BevelingManufacturers can bevel the edges of stainless steel pipes to prepare them for welding.
ThreadingStainless steel pipes can be supplied, besides plain and beveled ends, also with threaded ends (generally for NPS below 2 inches)
Pipe Honing & TurningManufacturers can hone SS pipe and tube, using precision abrasion tools and obtain any desired finish or dimensional tolerance.
Heat treating & AnnealingMost stainless steel pipes grades can be heat treated to modify their mechanical properties.
Positive Material Identification (PMI)Manufacturers can perform PMI testing to ascertain the actual content of Nickel, Chrome, and Moly in the pipe.
UT TestingIn some cases, UT testing of the stainless steel plates may be required.

Stock List of Polished Stainless Steel Pipe & Tube

ASTM A269 straight tube Stainless Steel Tube
ASTM A249 Mirror Tube Jis Stainless Steel Tubing
SA312 ss Pipes SS Seamless Tube
ASTM A312 Coiled Tubing Stainless Steel Inox Capillary Tubing
ASTM A312 gr Aerospace tubes SS Electric Fusion Welding Pipes
Stainless Steel Pipe Type Stainless Steel Polished Pipes

Stainless Steel Seamless Tubes Surface Finish

Surface Finish Internal Surface(ID) Exterbal Surface(OD)
Roughness Average(RA) Roughness Average(RA)
μ inch μm μ inch μm
AP Annealed & Pickled Not defined Not defined 40 or Not defined 1.0 or Not defined
BA Beight Annealed 40,32,25,20 1.0,0.8,0.6,0.5 32 0.8
MP Mechanical Polish 40,32,25,20 1.0,0.8,0.6,0.5 32 0.8
EP Electro Polish 15,10,7,5 0.38,0.25,0.20;0.13 32 0.8

We Stock Schedule 10 Stainless Steel Pipe of Following Brands

BAO STEEL
Sumitomo Metals
Tenaris

Sandvik
Valourec & Mannesman

Best price & quick delivery of Thin Wall Stainless Steel Pipe in India, ASME SA 213 Seamless Tube Stockholder and Exporter

Stainless Steel Round Tube Sizes

Wall Sizes ( O.D.)
.010 1/16" , 1/8" , 3/16"
.020 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8"
.012 1/8"
.016 1/8" , 3/16"
.028 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2"
.035 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.049 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.065 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3"
.083 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3"
.095 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2"
.109 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2"
.120 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3"
.125 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4"
.134 1"
.250 3"
.375 3 1/2"

Machinability Types Of Stainless Steel Pipes

Stainless Steel Pipes Machinability


SS Pipes Physical Properties

Stainless Steel Pipes Physical Properties


Pressure Rating of Ferritic Stainless Steel Tube

OD inches Ave. Wall inches Min Yield Strength (PSI) Min Tensile Strength (PSI) Theoretical Burst Pressure * (PSI) Working Pressure (PSI) 25% of Burst Theoretical Yield Point ** (PSI) Collapse Pressure *** (PSI)
0.250 0.020 30,000 75,000 14,286 3,571 5,714 4,416
0.250 0.028 30,000 75,000 21,649 5,412 8,660 5,967
0.250 0.035 30,000 75,000 29,167 7,292 11,667 7,224
0.250 0.049 30,000 75,000 48,355 12,089 19,342 9,455
0.250 0.065 30,000 75,000 81,250 20,313 32,500 11,544
0.375 0.020 30,000 75,000 8,955 2,239 3,582 3,029
0.375 0.028 30,000 75,000 13,166 3,292 5,266 4,145
0.375 0.035 30,000 75,000 17,213 4,303 6,885 5,077
0.375 0.049 30,000 75,000 26,534 6,634 10,614 6,816
0.375 0.065 30,000 75,000 39,796 9,949 15,918 8,597
0.500 0.020 30,000 75,000 6,522 1,630 2,609 2,316L
0.500 0.028 30,000 75,000 9,459 2,365 3,784 3,172
0.500 0.035 30,000 75,000 12,209 3,052 4,884 3,906
0.500 0.049 30,000 75,000 18,284 4,571 7,313 5,316L
0.500 0.065 30,000 75,000 26,351 6,588 10,541 6,786
0.500 0.083 30,000 75,000 37,275 9,319 14,910 8,307
0.625 0.020 30,000 75,000 5,128 1,282 2,051 1,859
0.625 0.028 30,000 75,000 7,381 1,845 2,953 2,568
0.625 0.035 30,000 75,000 9,459 2,365 3,784 3,172
0.625 0.049 30,000 75,000 13,947 3,487 5,579 4,335
0.625 0.065 30,000 75,000 19,697 4,924 7,879 5,591
0.625 0.083 30,000 75,000 27,124 6,781 10,850 6,910
0.625 0.095 30,000 75,000 32,759 8,190 13,103 7,734
0.625 0.109 30,000 75,000 40,172 10,043 16,069 8,639
0.750 0.028 30,000 75,000 6,052 1,513 2,421 2,156
0.750 0.035 30,000 75,000 7,721 1,930 3,088 2,669
0.750 0.049 30,000 75,000 11,273 2,818 4,509 3,664
0.750 0.065 30,000 75,000 15,726 3,931 6,290 4,749
0.750 0.083 30,000 75,000 21,318 5,330 8,527 5,905
0.750 0.095 30,000 75,000 25,446 6,362 10,179 6,637
0.750 0.109 30,000 75,000 30,733 7,683 12,293 7,453
0.750 0.120 30,000 75,000 35,294 8,824 14,118 8,064
0.875 0.020 30,000 75,000 3,593 898 1,437 1,340
0.875 0.028 30,000 75,000 5,128 1,282 2,051 1,859
0.875 0.035 30,000 75,000 6,522 1,630 2,609 2,316L
0.875 0.049 30,000 75,000 9,459 2,365 3,784 3,172
0.875 0.065 30,000 75,000 13,087 3,272 5,235 4,126
0.875 0.083 30,000 75,000 17,560 4,390 7,024 5,152
0.875 0.095 30,000 75,000 20,803 5,201 8,321 5,807
0.875 0.109 30,000 75,000 24,886 6,221 9,954 6,543
0.875 0.120 30,000 75,000 28,346 7,087 11,339 7,100
1.000 0.028 30,000 75,000 4,449 1,112 1,780 1,633
1.000 0.035 30,000 75,000 5,645 1,411 2,258 2,027
1.000 0.049 30,000 75,000 8,149 2,037 3,259 2,796
1.000 0.065 30,000 75,000 11,207 2,802 4,483 3,647
1.000 0.083 30,000 75,000 14,928 3,732 5,971 4,567
1.000 0.095 30,000 75,000 17,593 4,398 7,037 5,159
1.000 0.109 30,000 75,000 20,908 5,227 8,363 5,827
1.000 0.120 30,000 75,000 23,684 5,921 9,474 6,336
1.000 0.134 30,000 75,000 27,459 6,865 10,984 6,963
1.250 0.035 30,000 75,000 4,449 1,112 1,780 1,633
1.250 0.049 30,000 75,000 6,380 1,595 2,552 2,260
1.250 0.065 30,000 75,000 8,705 2,176 3,482 2,958
1.250 0.083 30,000 75,000 11,485 2,871 4,594 3,719
1.250 0.095 30,000 75,000 13,443 3,361 5,377 4,213
1.250 0.109 30,000 75,000 15,843 3,961 6,337 4,776
1.250 0.120 30,000 75,000 17,822 4,455 7,129 5,207
1.250 0.134 30,000 75,000 20,468 5,117 8,187 5,742
1.500 0.035 30,000 75,000 3,671 918 1,469 1,367
1.500 0.049 30,000 75,000 5,243 1,311 2,097 1,896
1.500 0.065 30,000 75,000 7,117 1,779 2,847 2,487
1.500 0.083 30,000 75,000 9,333 2,333 3,733 3,136
1.500 0.095 30,000 75,000 10,878 2,719 4,351 3,559
1.500 0.109 30,000 75,000 12,754 3,188 5,101 4,043
1.500 0.120 30,000 75,000 14,286 3,571 5,714 4,416
1.500 0.134 30,000 75,000 16,315 4,079 6,526 4,881
1.500 0.148 30,000 75,000 18,439 4,610 7,375 5,336
1.750 0.035 30,000 75,000 3,125 781 1,250 1,176
1.750 0.049 30,000 75,000 3,864 966 1,546 1,434
1.750 0.065 30,000 75,000 6,019 1,505 2,407 2,146
1.750 0.083 30,000 75,000 7,860 1,965 3,144 2,711
1.750 0.095 30,000 75,000 9,135 2,284 3,654 3,080
1.750 0.109 30,000 75,000 10,672 2,668 4,213 3,504
1.750 0.120 30,000 75,000 11,921 2,980 4,768 3,832
1.750 0.134 30,000 75,000 13,563 3,391 5,425 4,242
1.750 0.148 30,000 75,000 15,268 3,817 6,107 4,645
1.750 0.165 30,000 75,000 17,430 4,357 6,972 5,124
2.000 0.035 30,000 75,000 2,720 680 1,088 1,032
2.000 0.049 30,000 75,000 3,864 966 1,546 1,434
2.000 0.065 30,000 75,000 5,214 1,303 2,086 1,887
2.000 0.083 30,000 75,000 6,788 1,697 2,715 2,387
2.000 0.095 30,000 75,000 7,873 1,968 3,149 2,715
2.000 0.109 30,000 75,000 9,175 2,294 3,670 3,092
2.000 0.120 30,000 75,000 10,227 2,557 4,091 3,384
2.000 0.134 30,000 75,000 11,605 2,901 4,642 3,751
2.000 0.148 30,000 75,000 13,028 3,257 5,211 4,111
2.000 0.165 30,000 75,000 14,820 3,705 5,928 4,542

Dimensions of Stainless Steel Seamless Tubes

PIPE SCHEDULES WALL THICKNESS (Inches)
Nominal
O.D. Inches
10s
10
40s & Std
40
80s & E.H.
80
160
1/8
.405
.049
.049
.068
.068
.095
.095
1/4
.540
.065
.065
.088
.088
.119
.119
3/8
.675
.065
.065
.091
.091
.126
.126
1/2
.840
.083
.083
.109
.109
.147
.147
.187
3/4
1.050
.083
.083
.113
.113
.154
.154
.218
1
1.315
.109
.109
.133
.133
.179
.179
.250
1 1/4
1.660
.109
.109
.140
.140
.191
.191
.250
1 1/2
1.900
.109
.109
.145
.145
.200
.200
.281
2
2.375
.109
.109
.154
.154
.218
.218
.343
2 1/2
2.875
.120
.120
.203
.203
.276
.276
.375
3
3.500
.120
.120
.216
.216
.300
.300
.437
3 1/2
4.000
.120
.120
.226
.226
.318
.318
4
4.500
.120
.120
.237
.237
.337
.337
.531
4 1/2
5.000
.247
.355
5
5.563
.134
.134
.258
.258
.375
.375
.625
6
6.625
.134
.134
.280
.280
.432
.432
.718
7
7.625
.301
.500
8
8.625
.148
.148
.322
.322
.500
.500
.906
9
9.625
.342
.500
10
10.750
.165
.165
.365
.365
.500
.593
1.125
11
11.750
.375
.500
12
12.750
.180
.180
.375
.406
.500
.687
1.312
14
14.000
.188
.250
.375
.437
.500
.750
1.406
16
16.000
.188
.250
.375
.500
.500
.843
1.593
18
18.000
.188
.250
.375
.562
.500
.937
1.781

Check what exactly we supply in Following countries

15mm stainless steel pipe United Kingdom -UK, Chile, China, South Africa
1/8"~32" Stainless Steel Pipe UK, United Arab Emirates (UAE), Philippines, Bahrain
SS Seamless round Pipe Philippines, Netherlands, Malaysia, Philippines
2b surface seamless stainless steel pipe Europe, Egypt, Sweden, Oman
Bright Annealed Tube Stainless Steel For Instrumentation Spain, Australia, Malaysia, Germany
20mm diameter stainless steel pipe Europe, Malaysia, Singapore, USA
mirror polished SS pipes Canada, Italy, Japan, Saudi Arabia (KSA)
Sanitary Seamless Stainless Steel Tube Malaysia, Turkey, Colombia, South Africa
Round Polished Stainless Steel Pipe Mexico, Malaysia, Taiwan, Thailand
ANSI B36.19 Wrought Steel Pipe Malaysia, UK, South Korea, Bangladesh
ERW 100mm large diameter pipes steel Poland, Singapore, Romania, Kuwait
Stainless Steel ERW Round Pipe, Unit Pipe Length: 6 meter Canada, Iran, Malaysia, Singapore
SS capillary seamless small steel tube Singapore, Norway, Los Alamos -Mexico, Finland
needle stainless steel tube bright polished Ellington -United States, Russia, NY 12203 (USA), Brazil
Stainless Steel Hollow Section Pipe Singapore, Hong Kong, Dammam -KSA, UAE
SS 30 inch seamless steel tube Malaysia, Dubai, Qatar, Nigeria
Polished Decorative Schedule 10 Stainless Steel Pipe Belgium, Malaysia, Czechia, UAE
Flexible stainless steel bellow tube Thailand, UK, Malaysia, Indonesia
micro/capillary thin wall stainless steel pipe Malaysia, Philippines, Europe, France

whatsapp chat