S355J0 hollow section

What is the manufacturing processes of Carbon steel S355J0 square tubing?

• Raw materials like iron ore, coal, etc., are obtained and then processed in a blast furnace.
• They are melted to create molten iron which is then refined and converted into steel. This is done through a series of heating and cooling processes.
• The steel is formed into S355J0 Square Tubing through a combination of hot and cold rolling techniques.
• Finally, the Carbon steel S355J0 square tubing undergo finishing operations like cutting, straightening, and surface treatment.

Leading EN10025 S355J0 steel square tubing supplier in India

What are the considerations for joining or connecting S355J0 hollow section?

• The welding process should be chosen carefully. It should be done considering factors like the section thickness and the specific welding technique suitable for carbon steel.
• Preheating and post-weld heat treatment might be necessary to reduce residual stresses. Proper preparation of the S355J0 hollow section and other surfaces to be joined. This includes cleaning and removal of contaminants, which is crucial for achieving a strong bond.
• The selection of appropriate filler materials and welding parameters plays a significant role in ensuring the integrity of the connection.

Our company is a well-established exporter of S355J0 Square Tubing

What are the potential applications or industries where S355J0 Square Tube are commonly used?

S355J0 Square Tube is commonly used in the construction and fabrication of steel structures, bridges, and buildings. They help in the manufacturing of heavy machinery like cranes and mining equipment. They are used in the transportation industry for the production of truck beds, trailers and railings. The oil and gas sector also uses these tubes for pipeline construction and offshore platforms.

We keep ready stock of S355J0 high tensile square tube in standard length

We perform destructive and non destructive tests on S355J0 Circular Hollow Section and Carbon steel S355J0 square tubing

En10025 S355J0 steel square tubing are available with anti rust oil coating

Are there any specific guidelines or recommendations for the design and structural use of S355J0 high tensile square tube?

• The design of S355J0 high tensile square tube should adhere to relevant structural codes and standards.
• It should be done considering factors like load requirements, deflection limits and safety factors.
• Also, determine the appropriate tube size, thickness and length based on the structural demands.
• Adequate support and bracing should be incorporated into the design to ensure stability.
• Potential environmental factors like corrosion protection measures, especially in outdoor or corrosive environments should be considered.

How are the welding properties of En10025 S355J0 steel square tubing evaluated and tested?

• Conducting weldability tests like the Charpy V-notch impact test. It assesses the material’s ability to withstand impacts after welding.
• Tensile tests are performed to measure the strength and ductility of En10025 S355J0 steel square tubing welded joints.
• Visual inspections and non-destructive testing techniques detect any defects or discontinuities in the welds.

What quality control measures are implemented during the packaging and export of S355J0 Square Tube?

• S355J0 steel square tubes are carefully inspected for any surface defects, dimensional accuracy and compliance.
• They are then securely bundled or stacked to prevent damage during transportation. Protective measures such as plastic caps or end protectors are used to safeguard the tube ends.
• Proper labeling and documentation are carried out to ensure traceability and adherence to export regulations.