IBR and Non IBR Boiler Pipes
Refer Jindal Non IBR LSAW Steel Pipe Specification
Jindal Non IBR LSAW Steel Pipe is a standard pipe type that does not belong to the Indian Boiler Regulation. There are similar terms used such as hoggin and sagging pipes. There are different materials grades, standards and specifications under with IBR and non IBR pipes are made. The IBR and Non IBR Boiler Pipesis used with steam applications. The Indian Boiler Regulation has certain standards. When the pipes for boiler applications are made but are outside the regulatory measures, these are called the non IBR pipes. The non ibr electric boiler pipes are used with large size electric boilers.
IBR and Non IBR Boiler Pipes
Non IBR LSAW Steel Pipe
NON-IBR Boiler
Buy IBR steam pipe, Check NON-IBR Boiler Sizes
Boiler application pipes need to be high temperature resistance, high corrosion resistant and to have high Hydrogen Induced Corrosion which is common in steam pipelines. The NON-IBR Boiler category is usually with less than 25 liters capacity, less than one kilogram per centimeter square design gauge pressure and working pressure. Also the non IBR standards means the water is heated below one hundred degrees Celsius. The Mild Steel Non IBR Pipes play a good role as they are cost effective and strong but are general corrosion resistant. The carbon steels are used because of the low cost in many other applications including the boiler class applications.
Table of Content
Spec Chart of Non IBR Pipes
| Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
|---|---|
| Outer Dimensions | 4.0mm – 60.0mm |
| size | 5.0 - 1219.2 mm |
| Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Length | Single Random, Double Random, Standard & Cut length Pipe |
| Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc |
| Form | are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| Types | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW |
| End | Plain End, Beveled End, Treaded Pipe, Screwed ends |
| Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| manufacturing Technique | Cold drawn, hot drawn, bright annealed, solid solution, hot extruding |
| Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
Supplier of NON-IBR Boiler in Various Thickness & Schedules
Various Types of NON-IBR Boiler
IBR steam pipe
Non IBR Piping
Mild Steel Non IBR Pipes
Jindal Non IBR Pipes
Non IBR Tubes
Non IBR boiler
Non IBR electric boiler
Non IBR boiler tube
Technical Specifications of IBR steam pipe
| Details | Unit | RT-03 | RT-04 | RT-05 | RT-06 | RT-08 | RT-10 |
| OPERATING PARAMETERS | |||||||
| Steam output F & A 100oC. | Kgs/hr | 300 | 400 | 500 | 600 | 800 | 1000 |
| Steam pressure | Kgs/cm2 | 15 | 15 | 15 | 15 | 15 | 15 |
| Fuel Oil Consumption LDO FO |
Kgs/hr Kgs/hr |
18 19.1 |
24 25.4 |
30 31.8 |
36 38.1 |
48 50.8 |
60 63.6 |
| Efficiency (NCV) | % | -------------> | 88 + 2 | <------------------------- | |||
| Start up | Minutes | 3 | 3 | 5 | 5 | 5 | 5 |
| Burner control | ----------------------> | ON/OFF | <--------------------------------- | ||||
| Pressure parts | OUTSIDE THE PURVIEW OF INDIAN BOILER REGULATIONS | ||||||
| Electric Supply | AC - 3 - PHASE : 415 V - 6% ; 50 Hz = 3%; 4 wire | ||||||
| Connected Electrical Load | |||||||
| Feed water pump water | HP | 1 | 1 | 1 | 1 | 1.5 | 1.5 |
| Blower | HP | 1 | 1 | 1.5 | 1.5 | 3 | 5 |
| Fuel Pump Motor | HP | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
| (For
F O fired units only) Total electrical load for : LDO Fired Units FO Fired Units |
KW | 3 2.5 HP 2.5 HP+3KW |
4.5 2.5 HP 2.5 |
6 3 HP 3 |
6 3 HP 3HP + 6 |
7.5 5 HP 5 |
7.5 7 HP + 7.5 KW |
| HP+4.5 KW | HP+6 KW | KW | HP+7.5 KW | ||||
| Flue Gas outlet | mm | 200 | 200 | 200 | 250 | 300 | 300 |
| Dry Weight (approx.) | Kgs | 1300 | 1400 | 1600 | 1700 | 1800 | 1950 |
Check dimensions and sizes of Mild Steel Non IBR Pipes
Advantages Of Non – Ibr Boiler
- Outside the purview of IBR
- No registration of boiler required at the site
- Ease of operation & Maintenance
Capacity of Non IBR electric boiler
| Capacity | 5 gallons (25 liters) |
Biggest Manufacturer of non ibr electric boiler in India
Applications of Non IBR boiler tube
- Aerospace
- Food & Dairy Plants
- Paper Industries
- Oil & Gas Exploration
- Desalination Plant
- Pharmaceutical Plant
