Leading 4130 Cds Tubing & Cold Drawn Seamless Hydraulic Tube Manufacturer

4130 Cds Tubing  is a cold drawn seamless chrome moly tube that is used for high corrosion resistance and performance. These pipes can be treated by mechanical means or with temperature. This allows the pipes to the be used in various applications with modifications before and after installation. They belong to the ASTM A519 specification. The Cold Drawn Seamless Tube is another variant of the cds tubes which are used explicitly for the use in hydraulic applications and can withstand high pressures. The products range in size from 4mm to 219mm with the wall thicknesses ranging from 0.5mm to 20mm and up to 13500mm in length. The shape of the tubes can vary as round or hydraulic.

Cold Drawn Seamless Tube

Cold Drawn Seamless Tube

Cold Drawn Steel Pipes

Cold Drawn Steel Pipes

Cold Drawn Seamless Hydraulic Tube

Cold Drawn Seamless Hydraulic Tube


Wide selection of Dimensions & Sizes CDS steel tube in Mumbai

The Cold Drawn Seamless Hydraulic Tube can be adapted with different pipe and tube ends such as plain end beveled end or treaded end depending on the requirement of the applications. The material is made up of nickel, carbon, molybdenum, manganese, silicon, iron and sulfur along with chromium in the composition. The chromium molybdenum content provides the specific properties of the Round Cold Drawn Seamless Steel Tube products. The minimum yield strength of these tubes can range up to 460 MPa and the minimum tensile strength can range up to 560 MPa with 20% elongation rate. There are other variations such as the cds 1020 tube which are also used in similar applications. These pipes are intended for high pressure, high temperature services due to their high strength and heat resistant properties.


Cold Drawn Seamless Tube Spec Chart

Standard ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB
Outer Dimensions 4.0mm – 60.0mm
size 5.0 - 1219.2 mm
Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
Schedule SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Length Single Random, Double Random, Standard & Cut length Pipe
Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc
Form are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc.
Types Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW
End Plain End, Beveled End, Treaded Pipe, Screwed ends
Value Added Service Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc.
manufacturing Technique Cold drawn, hot drawn, bright annealed, solid solution, hot extruding
Test Certificate Manufacturer Test Certificate
Laboratory Test Certificate from Govt. Approved Lab.
Under Third Party Inspection

Different Types of Cold Drawn Steel Pipes

4130 Cds Tubing

4130 Cds Tubing

Round Cold Drawn Seamless Steel Tube

Round Cold Drawn Seamless Steel Tube

Cds Steel Tube

Cds Steel Tube

Cds 2 Steel Tube

Cds 2 Steel Tube

Cds 1020 Tube

Cds 1020 Tube

Cds Tubing

Cds Tubing

1026 Cds Tubing

1026 Cds Tubing

Cold Drawn Seamless Stainless Steel Tube

Cold Drawn Seamless Stainless Steel Tube


Size Range of Cold Drawn Seamless Hydraulic Tube

Gauge Width
1.375 – 7.750" 0.188 - 1.718"

Cold Drawn Seamless Tube Manufacturers in India

Dimensions of Round Cold Drawn Seamless Steel Tube

O.D Wall 0.71 0.81 0.91 1.22 1.42 1.63 2.03 2.34 2.64 2.95 3.25 4.06 4.76 4.88 6.35 7.94 9.53 12.70
4.76                                    
6.35     x x   x                        
7.94     x x   x x                      
9.53     x x x x x   x   x              
11.11     x x x x x                      
12.70     x x x x x   x   x              
14.29 x   x x   x x   x x x              
15.88     x x   x x   x x x x   x        
17.46     x     x x       x              
19.05       x   x x   x x x x   x x      
20.64           x x       x              
22.22       x x x x   x x x x   x x      
25.40       x x x x x x x x x   x x      
26.99           x x       x x   x        
28.58       x x x x   x   x x   x x      
30.16           x x   x                  
31.75       x   x x   x   x x   x x x    
33.34           x           x            
34.93       x   x x   x   x x   x x x x  
38.10           x x   x   x x   x x x x  
39.69                     x     x        
41.28           x x   x   x x   x x x x  
42.86                 x   x              
44.45           x x   x   x x   x x x x  
47.63                 x   x x   x x x    
50.80       x   x x   x   x x   x x x x  
53.98                     x     x x x x  
57.15             x   x   x x   x x   x  
60.33           x         x x   x x x x  
63.50             x   x   x x   x x x x  
66.68                     x     x x      
69.85                 x   x x   x x   x x
73.02           x                        
76.20           x x   x   x     x x x x x
79.38           x                        
82.55           x     x   x       x   x  
88.90                     x       x x x  
95.25                     x       x      
101.60                     x x     x      
107.95                     x       x      
114.30                     x       x      
127.00                     x             x

OD Tolerance of Cds Steel Tube

OD Tolerance +/- .005″ (up to 1.500″ OD), to +/- .010″ (above 1.500″ OD)

Ready Stock of cds 2 steel tube & cds 1020 tube

Cds 2 Steel Tube Wall Tolerance

Wall Tolerance +/- 10% (For ID’s Over .500″) to +/- 15% (for ID’s under .500″)

Features of 4130 Cds Tubing

  • Uniform structure reduces machining time and expense
  • Cost effective heavy wall tubing
  • Wide range of sizes

Check sizes and price of Round Cold Drawn Seamless Steel Tube

Applications of Cds Steel Tube

  • Refining
  • Refrigeration
  • Heating and Air Conditioning
  • Chemical & Electric Power
  • Petrochemical
  • Gas transmission
  • Pulp and paper

whatsapp chat