Leadin Manufacturer of ASME SA500 Gr A Carbon Steel SHS Pipe

ASME SA500 Gr A Carbon Steel SHS pipes are made above a carbon steel. Dis pipes can range in size from 20 millimeter to 400 millimeter. The wall thickness of the pipes also range differently. The length of the pipe can range from 6000 millimeters to 14,000 millimeters. The wall thickness ranges from zero point 5 millimeter to 25 millimeter. The pipes range in production as seamless welded or ERW. The dimensional tolerances are low for these pipes with 10% plus or minus. ASTM A500 SHS Square Pipe can have different types of coatings such as black, varnish, oil coating, galvanized, or hot dip galvanized and others.

ASTM A500 SHS Square Pipe

ASTM A500 SHS Square Pipe

ASME SA500 SHS Tubing

ASME SA500 SHS Tubing

Cold Formed ASTM A500 Gr B Square Hollow Section

Cold Formed ASTM A500 Gr B Square Hollow Section


Leading Stockist of A500 Grade B Square Steel Pipe in India, Exporter of ASME SA500 SHS Tubing

The material has different grades such as grade A comma grade B, grade B and grade D. The grade A has carbon phosphorus sulfur and copper in the combination. ASTM A500 Gr. B square hollow sections are used in stronger applications because they have good tensile strength and yield strength with minimum elongation of 25%.The minimum tensile strength of these vibes is 310 MPA. The minimum yield strength of the material is 269 MPA. The hot finished pipes have a low coast in comparison to the CDs pipes and this is also one better material where the dimensional accuracy is not much concerned. The application of these pipes could be seen in the construction, structural engineering, shipbuilding, petrochemical,  pharmaceutical and other applications in the industry. ASTM A500 Gr. A CS Hot Finish Square Pipes can be used as a replacement for high cost pipes that are made up of duplex steel stainless steel and other high alloy steels.


ASTM A500 SHS Pipe Specification Table

Standards ASTM, ASME and API
Craft Cold rolled and Cold drawn
Type ERW / Seamless / Fabricated / Welded / CDW
Size 1/2” NB to 36” NB
Form Round, Hydraulic Etc
Thickness 3-12mm
End Beveled End, Plain End, Treaded
Schedules Schedule 40, 80, 160, XS, XXS
Additional Testing NACE TM0177, NACE MR0175, NACE TM0284, SSC TEST, HIC TEST, H2 SERVICE, IBR, etc.
Tolerance Cold drawn pipe: +/-0.1mm
Cold rolled pipe: +/-0.05mm
Length Minimum 3 Meters, Maximum 18 Meters

Sizes of SA500 Gr A Cold Formed SHS Tubing

Round Pipes – OD 13.7-1214mm
Square Pipes – 10 X 10 mm – 800 X 800 mm
Rectangular Pipes – 10mm x 20mm – 400 x 800mm


SA500 Gr A Cold Formed SHS Tubing Types

A500 Grade B Square Tube

A500 Grade B Square Tube

ASTM A500 Gr. B square hollow sections

ASTM A500 Gr. B square hollow sections

ASME SA500 SHS Tubing

ASME SA500 SHS Tubing

A500 Gr A Carbon Steel Square Hollow Section

A500 Gr A Carbon Steel Square Hollow Section

SA500 Gr A Cold Formed SHS Tubing

SA500 Gr A Cold Formed SHS Tubing

ASTM A500 Seamless Square Hollow Section Tube

ASTM A500 Seamless Square Hollow Section Tube

A500 SHS pipe

A500 SHS pipe

ASTM A500 Gr. A CS Hot Finish Square Pipes

ASTM A500 Gr. A CS Hot Finish Square Pipes

ASTM A500 Gr A SHS Pipe

ASTM A500 Gr A SHS Pipe

ASME SA500 MS Square Tube

ASME SA500 MS Square Tube

ASTM A500 Gr A Carbon Steel SHS Pipe

ASTM A500 Gr A Carbon Steel SHS Pipe

Schedule 40 Carbon Steel Pipe A500 Gr B SHS

Schedule 40 Carbon Steel Pipe A500 Gr B SHS


Refer Dimensions of ASTM A500 Gr. B square hollow sections & SA500 SHS pipe

View ASTM A500 Gr A SHS Pipe Price List

Size mm kg/m Size mm kg/m
20 x 20 x 2.0 1.12 20 x 20 x 2.5 1.35
25 x 25 x 1.5 1.06 25 x 25 x 2.0 1.43
25 X 25 X 2.5 1.74 25 X 25 X 3.0 2.04
30 X 30 X 2.0 1.68 30 X 30 X 2.5 2.14
30 X 30 X 3.0 2.51 40 x 40 x 1.5 1.81
40 x 40 x 2.0 2.31 40 x 40 x 2.5 2.92
40 x 40 x 3.0 3.45 40 x 40 x 4.0 4.46
40 x 40 x 5.0 5.40 50 x 50 x 1.5 2.28
50 x 50 x 2.0 2.93 50 x 50 x 2.5 3.71
50 x 50 x 3.0 4.39 50 x 50 x 4.0 5.72
50 x 50 x 5.0 6.97 60 x 60 x 3.0 5.34
60 x 60 x 4.0 6.97 60 x 60 x 5.0 8.54
60 x 60 x 6.0 9.45 70 x 70 x 3.0 6.28
70 x 70 x 3.6 7.46 70 x 70 x 5.0 10.11
70 x 70 x 6.3 12.50 70 x 70 x 8 15.30
75 x 75 x 3.0 7.07 80 x 80 x 3.0 7.22
80 x 80 x 3.6 8.59 80 x 80 x 5.0 11.70
80 x 80 x 6.0 13.90 90 x 90 x 3.0 8.01
90 x 90 x 3.6 9.72 90 x 90 x 5.0 13.30
90 x 90 x 6.0 15.76 90 x 90 x 8.0 20.40
100 x 100 x 3.0 8.96 100 x 100 x 4.0 12.00
100 x 100 x 5.0 14.80 100 x 100 x 5.0 14.80
100 x 100 x 6.0 16.19 100 x 100 x 8.0 22.90
100 x 100 x 10 27.90 120 x 120 x 5 18.00
120 x 120 x 6.0 21.30 120 X 120 X 6.3 22.30
120 x 120 x 8.0 27.90 120 x 120 x 10 34.20
120 X 120 X 12 35.8 120 X 120 X 12.5 41.60
140 X 140 X 5.0 21.10 140 X 140 X 6.3 26.30
140 X 140 X 8 32.90 140 X 140 X 10 40.40
140 X 140 X 12.5 49.50 150 X 150 X 5.0 22.70
150 X 150 X 6.3 28.30 150 X 150 X 8.0 35.40
150 X 150 X 10 43.60 150 X 150 X 12.5 53.40
150 X 150 X 16 66.40 150 X 150 X 16 66.40
180 X 180 X 5 27.40 180 X 180 X 6.3 34.20
180 X 180 X 8 43.00 180 X 180 X 10 53.00
180 X 180 X 12.5 65.20 180 X 180 X 16 81.40
200 X 200 X 5 30.50 200 X 200 X 6 35.8
200 x 200 x 6.3 38.2 200 x 200 x 8 48.00
200 x 200 x 10 59.30 200 x 200 x 12.5 73.00
200 x 200 x 16 91.50 250 x 250 x 6.3 48.10
250 x 250 x 8 60.50 250 x 250 x 10 75.00
250 x 250 x 12.5 92.60 250 x 250 x 16 117.00
300 x 300 x 6.3 57.90 300 x 300 x 8 73.10
300 x 300 x 10 57.90 300 x 300 x 8 90.70
300 x 300 x 12.5 112.00 300 x 300 x 16 142.00
350 x 350 x 8 85.70 350 x 350 x 10 106.00
350 x 350 x 12.5 132.00 350 x 350 x 16 167.00
400 x 400 x 10 122.00 400 x 400 x 12 141.00
400 x 400 x 12.5mm 152.00 400 x 400 x 16 192

ASTM A500 Chemical Composition

ASTM A500 C, max P, max S, max Cu, min
Grade B 0.26 0.035 0.035 0.20

ASTM A500 Grade B Mechanical Properties

ASTM A500 Tensile strength, min Yield strength, min, Elongation in 2 in. (50.8 mm) min, %
Grade B 400 MPa, 58 000 psi 317 MPa, 46 000 psi 23

Tensile Requirements of A500 Grade B Square Tube

Round Structural Tubing
  Grade A Grade B Grade C Grade D
Tensile strength, mn, ps (MPa) 45 000
(310)
58 000
(400)
62 00
(427)
58 000
(400)
Yield strength, mn, psi (MPa) 33 000
(228)
42 000
(290)
46 000
(317)
36 000
(250)
Elongation in 2 in. (50.8 mm), min, %A 25B 23C 21D 23C

Shaped Structural Tubing Properties

Shaped Structural Tubing
  Grade A Grade B Grade C Grade D
Tensile strength, mn, ps (MPa) 45 000
(310)
58 000
(400)
62 00
(427)
58 000
(400)
Yield strength, mn, psi (MPa) 39 000
(269)
46 000
(317)
50 000
(345)
36 000
(250)
Elongation in 2 in. (50.8 mm), min, %A 25B 23C 21D 23C

Outside Dimensional Tolerances for ASTM A500 Gr A Square & Rectangular Steel tubing

Outside Large Flat Dimension, in. (mm) Large Flat Dimension Tolerance, A plus and minus, in. (mm)
2½ (63.5) or under 0.020 (0.51)
Over 2½ to 3½ (63.5 to 88.9), incl 0.025 (0.64)
Over 3½ to 5½, inc 0.030 (0.76)
Over 5½ (139.7) 0.01 times large flat dimension

Check Pressure Rating of ASTM A500 Gr. A CS Hot Finish Square Pipes, ASME SA500 MS Square Tube

Twist Tolerances for Schedule 40 Carbon Steel Square Pipe A500 Gr B SHS

Specified Dimension of Longest Side, in. (mm) Maximum Twist in the First 3 ft (1 m) and in each additional 3 ft
  in. mm
1½ (38.1) and under 0.050 1.39
Over 1½ to 2½ (38.1 to 63.5),incl 0.062 1.72
Over 2½ to 4 (63.5 to 101.6), incl 0.075 2.09
Over 4 to 6 (101.6 to 152.4), incl 0.087 2.42
Over 6 to 8 (152.4 to 203.2), incl 0.100 2.78
Over 8 (203) 0.112 3.11

Check Stocklist of ASTM A500 Gr. B square hollow sections

ASTM A500 Gr.B Hot Finish Seamless Carbon Steel Tubing ASTM A500 Gr B MS Square Hollow Section Pipe
ASTM A500 Gr B Hot Finish square steel box section ASTM A500 Gr B Hot Finished Carbon Steel Seamless SHS Pipe
ASTM A500 Gr B SHS Section ASTM A500 Gr B Hot Finish MS SHS Tube
ASTM A500 Gr B Hot Finish Square ERW Hollow Section Welded Hot Finish ASTM A500 Gr B SHS Pipe
ASTM A500 Grade B Hot Finish ERW Square Hollow Section ASTM A500 Grade B Hot Finished Square Hollow Section
ASTM A500 Hot Finish Square Hollow Sections Hot Finish A500 Gr B Seamless SHS Pipe

Size Chart of ASME SA500 SHS Tubing

Square Steel Pipe (mm )
OD WT OD WT
15*15 0.6–1.5 120*120 1.7—5.75
20*20 0.6—2.5 125*125 2.75-5.75
25*25 0.6—3.0 130*130 4.0—5.75
30*30 0.6—4.0 140*140 2.75-5.75
40*40 0.7—5.0 150*150 2.5-9.75
50*50 0.7—5.75 160*160 3.0-9.75
60*60 0.7—5.75 180*180 3.0-9.75
70*70 1.0—5.75 200*200 3.5-11.75
75*75 1.3—5.75 250*250 3.75-11.75
80*80 1.3—5.75 300*300 4.75-11.75
90*90 1.5—5.75 350*350 7.75-11.75
100*100 1.2—5.75 400*400 7.75-11.75

Ask for Latest Price list of Schedule 40 Carbon Steel Pipe A500 Gr B SHS & SA500 Gr A Cold Formed SHS Tubing

Typical Uses of ASME SA500 MS Square Tube

  • Structural Supports
  • Building columns
  • Highway Signs
  • Oil Field Services
  • Communication Towers

Customized Cut Lengths Available of A500 SHS pipe

  • 0.500" Sch. 40 to 16.000" XH
  • Stocked in 21.000’ and 42.000’ lengths (cut to length available)

whatsapp chat