Check ASME B36.19M Pipe Dimensions & Sizes

ASME B36.19M Pipe fall under a specification that covers the dimensions for seamless and welded steel pipes high temperature services as well as low temperature services. The diameters range from 1/8 inches to 10 inches. The ASME B36.19 Stainless Steel Pipe has wall thicknesses ranging from 0.5mm to 20mm and schedules ranging from sch5 through XXS and heavier. There are heavy wall pipes which require additional wall thicknesses. The pipes come under different material grades. The ANSI B36.19 Stainless Steel Pipe is of smaller diameter category. These can be used in sanitary, water purification, gas transmission and in other domestic, commercial and industrial applications. The pipe tolerances vary with the NPS and they range from 0.4mm.

ANSI B36.19 Stainless Steel Pipe

ANSI B36.19 Stainless Steel Pipe

ASME B36.19M Pipe

ASME B36.19M Pipe

ASME B36.19 Tube

ASME B36.19 Tube


Wide range of ASME B36.19 Stainless Steel Pipe specifications

The pipes vary in lengths from single random, double random to custom cut to length sizes. Different materials can be used such as ferritic, austenitic, duplex and high alloy materials to make pipes under these dimensional standards. The corrosion resistance and strength depends on the material used for the production of these pipes. The ASME B36.19M Stainless Steel Pipe is used in different applications in the industrial level such as oil and gas, petroleum, petrochemical, heat exchanger, boiler, cosmetics, power generation plants and so on. The ANSI B36.19 Pipe can also be coated with different coats such as black paint, 3LPE and others. The pipe ends can be made plain or beveled and treaded depending on the application requirements. The density, strength and the prices vary from material grade to grade.


ANSI B36.19 Stainless Steel Pipe Material Specification

Standard ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB
Outer Dimensions 4.0mm – 60.0mm
size 5.0 - 1219.2 mm
Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
Schedule SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Length Single Random, Double Random, Standard & Cut length
Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc
Form are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc.
Types Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW
End Plain End, Beveled End, Treaded, Screwed ends
Value Added Service Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc.
manufacturing Technique Cold drawn, hot drawn, bright annealed, solid solution, hot extruding
Test Certificate Manufacturer Test Certificate
Laboratory Test Certificate from Govt. Approved Lab.
Under Third Party Inspection

Different Types of ASME B36.19M Pipe

ASME B36.19 Stainless Steel Pipe

ASME B36.19 Stainless Steel Pipe

ASME B36.19m Stainless Steel Tubing

ASME B36.19m Stainless Steel Tubing

ASME B36.19 Welded Tube

ASME B36.19 Welded Tube

ASME B36.19 Pipe

ASME B36.19 Pipe

Stainless steel B16.19 pipe

Stainless steel B16.19 Pipes

Stainless steel ANSI B36 19 Pipes

Stainless steel ANSI B36 19 Pipes

ASME B36.19M Stainless Steel Pipe

ASME B36.19M Stainless Steel Pipe

Steel Pipes ASME B36.10

Steel Pipes ASME B36.10


HIC Tested ASME B36.19M Stainless Steel Pipe for oil and gas pipelines

ASME B36.19 Pipe Size Chart

   Sch. 5S Sch 10S Sch 40S Sch 80S 

Diameter Tolerance of ASME B36.19 Stainless Steel Pipe

Pipes NPS/ DN/ ODAllowed Outside Diameter Tolerance
OverUnder
inchesmminchesmm
NPS 1/8 to 1½
DN 6 to 40
OD 10.3 to 48.3, mm
1/640.41/640.4
Over 1½ to 4
DN 40 to 100
OD 48.3 to 114.3 mm
1/320.81/320.8
Over 4 to 8
DN 100 to 200
OD 114.3 to 219.1 mm
1/161.61/320.8
Over 8 to 18
DN 200 to 450
OD 219.1 to 457 mm
3/322.41/320.8
Over 18 to 26
DN 450 to 650
OD 457 to 660 mm
1/83.21/320.8

Check price of ASME/ANSI B36.19 Stainless Steel Pipe ex Mumbai

ASME B36.19 Welded Tube Thickness Tolerance

Pipes NPS/ DN/ ODTolerance, % from Nominal
OverUnder
NPS 1/8 to 2½, all t/D ratios
DN 6 to 65
OD 10.3 to 73.0, mm
20.012.5
NPS 3 to 18, t/D up to 5%
DN 80 to 450
OD 88.9 to 457 mm
22.512.5
NPS 3 to 18, t/D > 5%
DN 80 to 450
OD 88.9 to 457 mm
15.012.5
NPS 20 and larger, welded, all t/D ratios
DN 500
OD 508 mm
17.512.5
NPS 20 and larger, seamless, t/D up to 5%
DN 500
OD 508 mm
22.512.5
NPS 20 and larger, seamless, t/D > 5%
DN 500
OD 508 mm
15.012.

Weight Tolerance of Stainless steel B16.19 pipe

  • Pipes of NPS 4 (DN100, 114.3mm) and smaller may be weighed in convenient lots; pipe in sizes larger than NPS 4 shall be weighed separately
  • Pipes NPS 12 (DN300, 323.8mm) and under, weight tolerance is: -3.5% / +10%
  • Pipes over NPS 12 (DN300, 323.8mm),weight tolerance is: -5% / +10%

Ready stock of ANSI B36.19 Pipe & Tube

Dimensions and Weights of ASME B36.19M Seamless Pipe

NPSDNO.D
inch
mm
SCH No.Wall
inch
mm
Weight
lb/ft
kg/m
1/860.405
10.3
5S
1/860.405
10.3
10S0.049
1.24
0.19
0.28
1/860.405
10.3
40S0.068
1.73
0.24
0.37
1/860.405
10.3
80S0.095
2.41
0.31
0.47
1/480.540
13.7
5S
1/480.540
13.7
10S0.065
1.65
0.33
0.49
1/480.540
13.7
40S0.088
2.24
0.43
0.63
1/480.540
13.7
80S0.119
3.02
0.54
0.80
3/8100.675
17.1
5S
3/8100.675
17.1
10S0.065
1.65
0.42
0.63
3/8100.675
17.1
40S0.091
2.31
0.57
0.84
3/8100.675
17.1
80S0.126
3.20
0.74
1.10
1/2150.840
21.3
5S0.065
1.65
0.54
0.80
1/2150.840
21.3
10S0.083
2.11
0.67
1.00
1/2150.840
21.3
40S0.109
2.77
0.85
1.27

Applications of ASME B36.19M Pipes

  • Oil & Gas
  • Construction
  • Power Energy
  • Automotive
  • Chemical

whatsapp chat